+++ /dev/null
-%
-%
-\ifcat a\noexpand @\let\next\relax\else \def\next{%
-\documentclass{kluwer}\usepackage{doc}\MakePercentIgnore}\fi\next
-\NeedsTeXFormat{LaTeX2e}
-% \def\changes#1#2{}
-% \changes{1997/07/10}{bugfix in title@thanks: move thanks into ititle@.}
-% \changes{1997/07/10}{bugfix in opening: inserted hsize == textwidth. This
-% to enforce double width in abstract (twocolumn layouts)}
-% \changes{1997/07/10}{changes in ititle@ to correct spacing of thanks. This
-% removed the need for title@@ and title@thanks: both removed}
-% \changes{1997/07/10}{speccright etc. removed (never used)}
-% \changes{1997/07/10}{crude vertical spacing fix for @arttype if copyrighthead}
-% \changes{1998/01/06}{fix thispagestyle (crt. endup on 2nd page if abstract too long)}
-% \changes{1998/02/04}{added new hooks: "beforeartskip", "titlebaselinefactor"}
-% \changes{1998/02/04}{made "classification", "keywords", "abbreviations" and "nomenclature" long}
-% \changes{1998/02/06}{force "email" lowercase}
-% \changes{1998/02/06}{removed () around defaulted dates}
-\def\filedate{1998/02/11}
-\def\filename{kluopen.sty}
-%\DoNotIndex{\@M,\def,\c@secnumdepth,\baselineskip,\@pnumwidth,\else,\fi}
-%\DoNotIndex{\newcommand,\z@,\relax,\renewcommand,\ifnum,\csname,\endcsname}
-%\DoNotIndex{\baselineskip,\vskip,\hskip,\relax,\secdef,\refstepcounter}
-%\DoNotIndex{\normalsize,\numberline,\protect,\endinput,\hfill}
-%\DoNotIndex{\@compare,\ifx,\global,\gdef,\def,\let,\hbox,\par,\typeout}
-%\CodelineIndex
-%\newcommand{\Bs}{$\backslash$}
-%\parindent=0pt
-%\parskip=3pt
-%\hfuzz=11pt
-%\MakeShortVerb{\|}
-%\setlength{\marginparwidth}{0in}
-%\addtolength{\textwidth}{4pc}
-%\begin{document}
-%\begin{opening}
-%\title{\filename}
-%\date{\filedate}
-%\author{Kluwer Academic Publishers\surname{}}
-%\institute{~}
-%\runningtitle{\filename\ -- \filedate}
-%\runningauthor{Kluwer Academic Publishers}
-%\editor{Test}
-%\journalcode{test}
-%\begin{abstract}
-% This internal stylefile defines most of the special kluwer
-% opening commands.
-%\end{abstract}
-%\end{opening}
-%\tableofcontents
-%\newpage\section{Implementation}
-% \begin{macrocode}
-\ProvidesPackage{kluopen}[\filedate ]
-% \end{macrocode}
-% \subsection{The opening environment}
-% The beginning of this environment is rather empty, there is not much
-% need to do anything here. All definitions inside the `opening' have
-% to be indirect |\def|s anyway, so we will start worrying about
-% typesetting things at the end of the environment.
-%
-% \begin{macrocode}
-\gdef\title#1{\title@{#1}}
-\gdef\author#1{\author@{#1}}
-\gdef\date#1{\date@{#1}}
-\def\opening{%
- \let\title=\title@
- \let\author=\author@
- \let\date=\date@
- \let\arttype=\arttype@
- \let\subtitle=\subtitle@
- \let\dedication=\dedication@
- \let\translation=\translation@
- \let\received=\received@
- \let\orf=\orf@
- \let\accepted=\accepted@
- \let\revised=\revised@
- \let\institute=\institute@
- \hsize\textwidth
- }
-% \end{macrocode}
-% Since |\listfiles| is a definite `preambleonly' command, we can test
-% for that. IF |\listfiles| = |\@notprerr| typeset opening, ELSE
-% typeset opening at begin document.
-%
-% If new commands are added to this list, don't forget to add them
-% above too. Also, please gobble all arguments carefully. Als note
-% that these redefinitions only take place if there is an |opening|
-% environment.
-%
-% The new syntax for |opening| is to use it {\it after\/}
-% |\begin{document}| and/or |\begin{article}|, but we still honour the
-% old syntax. Also, because I wanted to support |\maketitle| the
-% ordinary way, |\maketitle| is |\let| to |\endopening|.
-% \begin{macrocode}
-\gdef\maketitle{\endopening}
-\def\endopening{%
- \ifx\listfiles\@notprerr \maketitle@@ \else
- \AtBeginDocument{\maketitle@@}\fi
- \gdef\title##1{\opening@only\title}
- \gdef\subtitle##1{\opening@only\subtitle}
- \gdef\orf##1{\opening@only\orf}
- \gdef\dedication##1{\opening@only\dedication}
- \gdef\translation##1{\opening@only\translation}
- \gdef\received##1{\opening@only\received}
- \gdef\revised##1{\opening@only\revised}
- \gdef\author##1{\opening@only\author}
- \gdef\institute##1{\opening@only\institute}
- \gdef\date##1{\opening@only\date}%
- \gdef\arttype##1{\opening@only\arttype}
- }
-% \end{macrocode}
-% Let `opening only' == warning.
-% \begin{macrocode}
-\def\opening@only#1{\PackageWarning{kluopen}{\string#1\space
- effective only inside opening environment.}}
-% \end{macrocode}
-% \subsection{Internal Author and institute commands}
-% author and institute commands are seriously intertwined. Too bad
-% about the relocation that used to happen in |humnkap|, because has
-% been sacrificed again. It turned out be more of a fuzz than it was
-% worth.
-%
-% The general idea is to keep four different command lists that stack
-% the authors and institutes.
-%
-% Let's do the easy thing first. These are the `user' changeable
-% parameters for authors and institutes.
-% \begin{macrocode}
-\def\authorsize{\normalsize \raggedright}
-\def\authorcase#1{#1}
-\def\authorindent{0pt}
-\def\afterallauthorsskip{1em\relax}
-\def\afterauthorskip{0pt}
-\def\institutesize{\footnotesize\it}
-\def\institutecase#1{#1}
-\def\instituteindent{0pt}
-\def\institutesep{.4\baselineskip}
-\def\authorand{and}
-% \end{macrocode}
-% This is a hook for klups.sty (oldstyle numerals)
-% \begin{macrocode}
-\def\i@oldseries{}
-% \end{macrocode}
-%
-% We only need |\@temptokenb|, because |\@temptokena| is a \LaTeX\
-% scratch register.
-% \begin{macrocode}
-\newtoks\@temptokenb
-% \end{macrocode}
-% The list will, for example, look like this:
-%\begin{verbatim}
-%\@authors == {\@k@p {A. \surname{Thor}}\@k@p {B. \surname{Thor}}}
-%\end{verbatim}
-% \begin{macrocode}
-\long\def\append@item#1\to#2{%
- \@temptokena={\@k@p{#1}}%
- \@temptokenb=\expandafter{#2}%
- \xdef#2{\the\@temptokenb\the\@temptokena}}
-% \end{macrocode}
-% Extraction macros. Typical usage:
-%
-%\begin{verbatim}
-%\get@left\@instituteauthors\to\@curauths
-%\end{verbatim}
-%
-% This will expand into:
-%
-%\begin{verbatim}
-%\g@l\@k@p \ITEM1\@k@p \ITEM2 ...\g@l \@instituteauthors \@curauths
-%\end{verbatim}
-%
-% And from there into
-%
-%\begin{verbatim}
-%\def\@curauths \ITEM1 \def\@institeauthors{\ITEM2 ...}
-%\end{verbatim}
-%
-% Gee, this looks so easy if you write it out :-).
-% \begin{macrocode}
-\def\get@left#1\to#2{\expandafter\g@l#1\g@l#1#2}
-\long\def\g@l\@k@p#1#2\g@l#3#4{\def#4{#1}\def#3{#2}}
-% \end{macrocode}
-% This will contain the authors for the current institute.
-% \begin{macrocode}
-\def\@authors{}%
-% \end{macrocode}
-% This will contain all authors.
-% \begin{macrocode}
-\def\@allauthors{}%
-% \end{macrocode}
-% This will contain all institutes.
-% \begin{macrocode}
-\def\@institutes{}%
-% \end{macrocode}
-% This will contain items containing all of the authors that are
-% tied up to one institute.
-% \begin{macrocode}
-\def\@instituteauthors{}%
-% \end{macrocode}
-% These two are temporaries that need to be initialized.
-% \begin{macrocode}
-\def\@curauths{}
-\def\@curinst{}
-% \end{macrocode}
-% These are the insertion macros. |\author@| is the internal version
-% of |\author|, and just adds to the two author lists.
-%
-% |\institute@| is a bit trickier, it has to store the institute
-% itself for later retrieval, but it also has to clear |\@authors|, so
-% it can be used again for the next institute. It does this by moving
-% all of the collected authors in the |\@authors| list as one item
-% into the |\authors@institute| list.
-%
-% Because |\@institutes| and |\@instituteauthors| are parallel, there
-% will be an error condition if there are authors after the last
-% institute. The |\expandafter|'s are needed to get |\@authors| folded
-% out.
-% \begin{macrocode}
-\def\author@#1{\append@item#1\to\@authors
- \append@item#1\to\@allauthors }
-\def\institute@#1{\append@item#1\to\@institutes
- \expandafter\append@item\expandafter{\@authors}\to\@instituteauthors
- \gdef\@authors{}}
-% \end{macrocode}
-% Format one name.
-%
-% The box in the first part is needed because we have to typeset once
-% in order to get the |\thanks|.
-%
-% The |\expandafter|'s in the second part bypass grouping. Param \#2
-% is either a comma or nothing. The italic correction is needed if
-% authors are typeset in Italics, or the thankssymbol will come out to
-% far to the left.
-%
-% \changes{1997/08/13}{Removed null box for thankssymbol and switched
-% places with comma (hor. spacing bugs)}
-% \begin{macrocode}
-\newif\ifthanks
-\def\orf@#1{#1}
-\def\@formatname#1#2{\begingroup
- \def\thanks##1{\global\thankstrue}\setbox0\vbox{#1}%
- \endgroup
- \begingroup
- \ifthanks
- \edef\fn##1\thanks##2{\authorcase{##1}\/%
- \noexpand\thanks{##2}#2}\expandafter\fn#1
- \else
- \edef\fn##1{{\authorcase{##1}}#2}%
- \expandafter\fn\expandafter{#1}%
- \fi
- \endgroup\global\thanksfalse }
-% \end{macrocode}
-%
-% Format authors presently in |\@curauths| (These are the ones belonging
-% to one specific institute).
-%
-% First, loop over |\@curauths| counting the number of authors. Then
-% we know how many, so loop over again, typesetting all. The |,| needs
-% to be given separately to make sure |\thanks| works inside an
-% author.
-%
-% It there are 0 authors, nothing will happen at all.
-% \begin{macrocode}
-\newcount\cnt@authors
-\def\@formatauthors{\begingroup
- \authorsize
- \leavevmode
- \gdef\surname##1{##1}%
- \gdef\email##1{ \hbox{({\tt \lowercase{##1}})}}%
- \cnt@authors=0
- \def\@k@p##1{\advance\cnt@authors by 1}\@curauths
- \def\@k@p##1{\advance\cnt@authors by -1
- \ifnum\cnt@authors>1
- \@formatname{##1}{,}\penalty0\ \fi % signif. space
- \ifnum\cnt@authors=1 % before \fi's !!
- \@formatname{##1}{} \authorand \penalty0\ \fi
- \ifnum\cnt@authors<1
- \@formatname{##1}{}\par\fi}\@curauths
- \vskip \afterauthorskip
- \endgroup}
-% \end{macrocode}
-% Format one institute.
-% \begin{macrocode}
-\def\@formatinstitute{{\institutesize \institutecase{\@curinst}\par}}
-% \end{macrocode}
-% Format all authors and all institutes. Indentation is done through
-% parindent and hangindent instead of rightskip, because otherwise a
-% |\centering| would fail.
-%
-% There is a space of |\institutesep| + |\parskip| between every
-% author\,/\,institute block, and double that space between the last
-% two (don't understand that).
-%
-% This macro also takes care of the case that there is no institute at
-% all given, which is likely to happen in the \LaTeX\ compatibility
-% mode. {\it This does not allow you to have only the last author without
-% an institute\/}.
-%
-% The |\relax| after |\@institutes| is absolutely necessary, or the
-% author will be set twice!
-% \begin{macrocode}
-\newcount\cnt@institutes
-\def\@authorsandinstitutes{\begingroup
- \authorsize
- \cnt@authors=0
- \def\@k@p##1{\advance\cnt@authors by 1}\@allauthors
- \cnt@institutes=0
- \def\@k@p##1{\advance\cnt@institutes by 1}\@institutes\relax
- \ifnum\cnt@institutes=0
- \let\@curauths\@allauthors
- \parindent=\authorindent
- \hangindent=\authorindent
- \@formatauthors
- \fi
- \loop\ifnum\cnt@institutes>0
- \get@left\@instituteauthors\to\@curauths
- \parindent=\authorindent
- \hangindent=\authorindent
- \@formatauthors
- \get@left\@institutes\to\@curinst
- \parindent=\instituteindent
- \hangindent=\instituteindent
- \@formatinstitute
- \ifnum\cnt@institutes=2 \vskip \institutesep\relax \fi
- \ifnum\cnt@institutes>1 \vskip \institutesep\relax \fi
- \advance\cnt@institutes by -1
- \repeat
- \vskip \afterallauthorsskip
- \gdef\@authors{}%
- \gdef\@allauthors{}%
- \gdef\@institutes{}%
- \gdef\@instituteauthors{}%
- \gdef\@curauths{}%
- \gdef\@curinst{}%
-\endgroup}
-% \end{macrocode}
-% \subsection{Typesetting the title and subtitle}
-% First, here are the user settings again:
-% \begin{macrocode}
-\def\titleflushstyle{}
-\def\titlefont{\Large\rm}
-\def\titlecase#1{#1}
-\def\titleindent{0pt}
-\def\aftertitleskip{1.8pc }
-\def\presubtitleskip{-1.4pc }
-\def\aftersubtitleskip{1pc }
-\def\subtitlefont{\large\it}
-\def\subtitleflushstyle{}
-% \end{macrocode}
-% Internal commands. |\@maketitle| will call |\@title|. |\title@| is
-% just an internal for |\title|.
-% \begin{macrocode}
-\def\title@#1{\gdef\@title{%
- \@formattitle{#1}\par \vskip \aftertitleskip }}
-\def\@title{}
-% \end{macrocode}
-% The trick with the vbox is the same as above, to get |\thanks|.
-% \begin{macrocode}
-\def\@formattitle#1{\begingroup
- \def\thanks##1{\global\thankstrue}%
- \setbox\@tempboxa\vbox{#1}\endgroup
- \begingroup
- \titleflushstyle
- \ifthanks
- \def\fn##1\thanks##2{\ititle@{##1}{\,\thanks{##2}}}%
- \expandafter\fn#1
- \else
- \def\fn##1{\ititle@{##1}{}}\expandafter\fn\expandafter{#1}%
- \fi
- \endgroup\global\thanksfalse }
-% \end{macrocode}
-% Not much left to do here. The flush style has been set by
-% |\@formattitle|, skips before and after by |\@title|.
-% \begin{macrocode}
-\def\titlebaselinefactor{1.05}
-\def\ititle@#1#2{\begingroup
- \parindent \titleindent
- \hangindent \titleindent
- \hyphenpenalty10000
- {\titlefont\titlecase{#1}#2%
- \baselineskip=\titlebaselinefactor\baselineskip
- \par}
- \endgroup}
-% \end{macrocode}
-% Basically, this is just an echo of title.
-% \begin{macrocode}
-\def\@subtitle{}
-\def\subtitle@#1{\gdef\@subtitle{\vskip \presubtitleskip
- \@formatsubtitle{#1}\par \vskip \aftersubtitleskip }}
-\def\@formatsubtitle#1{\begingroup
- \def\thanks##1{\global\thankstrue}\setbox0\vbox{#1}\endgroup
- \begingroup \subtitleflushstyle
- \ifthanks
- \def\fn##1\thanks##2{\subtitle@thanks{##1}{##2}}\expandafter\fn#1
- \else
- \def\fn##1{\subtitle@@{##1}}\expandafter\fn\expandafter{#1}\fi
- \endgroup
- \par\global\thanksfalse}
-\def\subtitle@thanks#1#2{\isubtitle@{#1}\thanks{#2}\par
- \ignorespaces}
-\def\subtitle@@#1{\isubtitle@{#1}\par\ignorespaces}
-\def\isubtitle@#1{{\subtitlefont #1}}
-% \end{macrocode}
-% \subsection{Date, article type, dedication and translation.}
-% These are all fairly straightforward, so I will not pay too much
-% attention to these commands.
-% \begin{macrocode}
-\def\afterdateskip{.7\baselineskip}
-\def\datesize{\footnotesize}
-\def\@date{{\i@oldseries\datesize Received: \@received ;
- Accepted\@accepted}\vskip \afterdateskip
- \gdef\@received{\ldots\ldots}%
- \gdef\@accepted{\ldots\ldots}}
-\def\date@#1{\gdef\@date{{\i@oldseries\datesize #1\par}\vskip \afterdateskip
- \gdef\@received{\ldots\ldots}%
- \gdef\@accepted{\ldots\ldots}}}
-\def\@received{\ldots\ldots}
-\def\@accepted{: \ldots\ldots}
-\def\revised@#1{\gdef\@accepted{ in revised form: #1}}
-\def\received@#1{\gdef\@received{#1}}
-\def\accepted@#1{\gdef\@accepted{ in final form: #1}}
-% \end{macrocode}
-%
-% \begin{macrocode}
-\def\artsize{\normalsize\it}
-\def\afterartskip{1.5pc}
-\def\beforeartskip{0pc}
-\def\@arttype{}
-\def\arttype@#1{\gdef\@arttype{\vskip\beforeartskip\noindent
- {\artsize #1\vskip\afterartskip}}}
-% \end{macrocode}
-%
-% \begin{macrocode}
-\def\@dedication{}
-\def\dedicationsize{\normalsize\it\raggedright}
-\def\prededicationskip{18pt}
-\def\afterdedicationskip{18pt}
-\def\dedication@#1{\gdef\@dedication{%
- \unskip\vskip \prededicationskip
- {\dedicationsize #1\par}%
- \vskip \afterdedicationskip}}
-% \end{macrocode}
-%
-% \begin{macrocode}
-\def\@translation{}
-\def\translationsize{\normalsize\it\raggedright}
-\def\pretranslationskip{18pt}
-\def\aftertranslationskip{18pt}
-\def\translation@#1{\gdef\@translation{%
- \unskip\vskip \pretranslationskip
- {\translationsize #1\par}%
- \vskip \aftertranslationskip}}
-% \end{macrocode}
-% \subsection{Abstract, keywords, abbreviations, classification
-% and nomenclature}
-% All of these are suppposed to have the same size. The only one with
-% a flexible before/after skip is |abstract|, but they all have their
-% own font defined for the name.
-% \begin{macrocode}
-\providecommand{\abstractname}{Abstract}
-\providecommand{\keywordsname}{Keywords}
-\providecommand{\abbreviationsname}{Abbreviations}
-\providecommand{\nomenclaturename}{Nomenclature}
-\def\abstractsize{\footnotesize}
-\def\abstractnamefont{\bf}
-\def\abstractdot{.~}
-\def\keynamefont{\bf}
-\def\nomennamefont{\bf}
-\def\abbrevnamefont{\bf}
-\def\classnamefont{\bf}
-\def\afterabstractskip{.7\baselineskip\relax}
-\def\preabstractskip{0pt\relax}
-% \end{macrocode}
-% Abstract is a box, because we still want to support the opening
-% environment before |\begin{document}|.
-%
-%{\it Note that the stylefile is resposible for making sure that these
-%are typeset at all}.
-% \begin{macrocode}
-\newbox\@abstractbox
-\def\@abstract{}
-\newenvironment{abstract}{%
- \gdef\@abstract{\message{\abstractname}%
- {\vskip\preabstractskip
- \noindent
- \unvbox\@abstractbox
- \vskip\afterabstractskip }}%
- \global\setbox\@abstractbox\vbox\bgroup \abstractsize \noindent
- {\abstractnamefont\abstractname\abstractdot}}{\par\egroup }
-\def\@keywords{}
-\long\def\keywords#1{%
- \gdef\@keywords{\message{\keywordsname}%
- {\abstractsize\noindent{\keynamefont
- \keywordsname:~}#1\par \vskip.7\baselineskip}}}
-\def\@abbreviations{}
-\def\abbrev#1#2{#1 -- #2}
-\long\def\abbreviations#1{%
- \gdef\@abbreviations{\message{\abbreviationsname}%
- {\abstractsize\noindent{\abbrevnamefont \abbreviationsname:~}%
- #1\par \vskip.7\baselineskip}}}
-\def\@nomenclature{}
-\def\nomen#1#2{#1 -- #2}
-\long\def\nomenclature#1{%
- \gdef\@nomenclature{\message{\nomenclaturename}%
- {\abstractsize\noindent{\nomennamefont
- \nomenclaturename:\par}\noindent #1\par \vskip.7\baselineskip}}}
-\def\@classification{}
-\long\def\classification#1#2{%
- \gdef\@classification{\message{Classification}%
- {\abstractsize\noindent{\classnamefont #1: }%
- #2\par \vskip.7\baselineskip}}}
-\def\motto{\@ifnextchar[{\prosemotto}{\poemmotto}}
-\newbox\mottobox
-\def\@motto{}
-\long\def\poemmotto{\global\setbox\mottobox\vbox \bgroup
- \noindent
- \hbox to\hsize\bgroup\begingroup
- \hfill\vbox\bgroup\hsize =15pc
- \footnotesize \raggedright \noindent
- \parskip=3pt}
-\long\def\prosemotto[#1]{\global\setbox\mottobox\vbox \bgroup
- \noindent
- \hbox to\hsize\bgroup \begingroup
- \hfill\vbox\bgroup\hsize =15pc
- \raggedright \footnotesize \noindent
- \parskip=3pt}
-\def\endmotto{\par \egroup \endgroup \egroup
- \vspace{1\baselineskip}\egroup
- \gdef\@motto{\par\message{Motto}\box\mottobox \gdef\@motto{}}}
-% \end{macrocode}
-% \subsection{@maketitle}
-% Internal commands for typesetting of the front part. |\@maketitle|
-% has been kept as simple as possible, making it easy to redefine the
-% order inside a stylefile. For twocolumn output, everything that is
-% done inside |\@maketitle| is typeset over two columns.
-%
-% As noted above, if the stylefile feels like removing some of these
-% commands, it also has to find a way to have them typeset, because
-% that will no longer be automatic.
-% \begin{macrocode}
-\def\@maketitle{%
- \@arttype \@title \@subtitle \@authorsandinstitutes \@date
- \@abstract \@keywords \@abbreviations \@classification
- \@nomenclature \@translation \@dedication \@motto}
-% \end{macrocode}
-% This command is called by |\endopening| and |\maketitle|.
-% \begin{macrocode}
-\def\openingflushstyle{}
-\def\maketitle@@{%
- \begingroup
- \setcounter{footnote}{0}%
- \def\thefootnote{\fnsymbol{footnote}}%
- \if@twocolumn
- \twocolumn[{\openingflushstyle
- \parindent 0pt
- \@maketitle}]
- \thispagestyle{opening}%
- \@extramaketitle
- \else
- \newpage\global\@topnum\z@
- \thispagestyle{opening}%
- {\openingflushstyle \parindent 0pt \@maketitle}%
- \fi
- \markboth{\@runningauthor}{\@runningtitle}%
- \@thanks
- \endgroup
- \setcounter{footnote}{0}%
- \let\@maketitle\relax
- \gdef\@thanks{}%
- \gdef\@title{}%
- \let\thanks\relax }
-% \end{macrocode}
-% \begin{macrocode}
-\def\runningtitle#1{\gdef\@runningtitle{#1}}
-\gdef\@runningtitle{}
-\def\runningauthor#1{\gdef\@runningauthor{#1}}
-\gdef\@runningauthor{}
-\endinput
-% \end{macrocode}
-%\PrintIndex
-%\end{document}
-% end of kluopen.sty
-
-
-
-
-
projects / helm.git / blobdiff