+++ /dev/null
-%
-%
-\ifcat a\noexpand @\let\next\relax\else \def\next{%
-\documentclass{kluwer}\usepackage{doc}\MakePercentIgnore}\fi\next
-\def\filedate{1998/02/11}
-\def\filename{klutab.sty}
-%\DoNotIndex{\@M,\def,\c@secnumdepth,\baselineskip,\@pnumwidth,\else,\fi}
-%\DoNotIndex{\newcommand,\z@,\relax,\renewcommand,\ifnum,\csname,\endcsname}
-%\DoNotIndex{\baselineskip,\vskip,\hskip,\relax,\secdef,\gdef,\@cla,\@clb}
-%\DoNotIndex{\normalsize,\protect,\global,\setbox,\hbox,\vbox,\endinput}
-%\DoNotIndex{\egroup,\endgroup,\bgroup,\begingroup,\let}
-%\CodelineIndex
-%\changes{1997/02/12}{TH: Inserted definition of `array' to accomodate `hline'.}
-%\newcommand{\Bs}{$\backslash$}
-%\parindent=0pt
-%\parskip=3pt
-%\hfuzz=10pt
-%\MakeShortVerb{\|}
-%\setlength{\marginparwidth}{0in}
-%\addtolength{\textwidth}{4pc}
-%\begin{document}
-%\begin{opening}
-%\title{\filename}
-%\date{\filedate}
-%\author{Kluwer Academic Publishers\surname{}}
-%\institute{~}
-%\begin{abstract}
-% This internal stylefile takes care of tabulars.
-%\end{abstract}
-%\end{opening}
-%\tableofcontents
-%\section{Usage}
-%
-% All of this is quite simple code. What happens
-% is that some extra lines for use in tabulars are defined and
-% included in the original definition of |tabular| and
-% |tabular*|. These have a bit of extra vertical space which breaks
-% the use of vertical rules in tabular's, which is why the old
-% definitions are saved as |TABULAR| and |TABULAR*|.
-%
-% There are some variations on |\cline|. I moved internal commands out of the
-% definition of |tabular| so they could be used in |tabular*| easily. \\[6pt]
-% |\rcline| == hbox 3pt to the left\\
-% |\lcline| == hbox 3pt to the right\\
-% |\lrcline| == both \\
-% |\rlcline| == |\lrcline| (to provide symmetry)
-%
-% All of the environments have
-% been changed so that they also set the value of |\@tabwidth|, which
-% is needed by |klufloa.sty|.
-%
-% |tabular*| has been adjusted to flush out the excess space over all
-% columns instead of to the right of the last one. This is controlled
-% by the value of |\stretchtabsep|, whose default value equals |\hfil|
-%
-%\newpage\section{Implementation}
-% \begin{macrocode}
-\NeedsTeXFormat{LaTeX2e}
-\ProvidesPackage{klutab}[\filedate ]
-% \end{macrocode}
-% \subsection{Tabular}
-% First some needed values. The `array' things may not belong here,
-% but is also not save to put them somewhere else. After all, \LaTeX\
-% seems to think this is correct.
-% \begin{macrocode}
-\arraycolsep 6pt
-\tabcolsep 6pt
-\arrayrulewidth .4pt
-\doublerulesep 2pt
-% \end{macrocode}
-%
-% Internal versions of the rules check whether first arg $>1$, and assign
-% |\@tabklu@tmpa| accordingly. Next, execute |\@tabklu@tmpa| and
-% unskip vertical width of rule. (All three are similar)
-% \begin{macrocode}
-\def\@rcline[#1-#2]{%
- \noalign{%
- \global\@cla #1\relax
- \global\advance\@cla\m@ne
- \ifnum\@cla >0
- \global\let\@tabklu@tmpa\@rclinea
- \else
- \global\let\@tabklu@tmpa\@rclineb
- \fi
- \global\@clb #2\relax
- \global\advance\@clb-\@cla }%
- \@tabklu@tmpa
- \noalign{\vskip-\arrayrulewidth}%
- }%
-\def\@rclinea{%
- \multispan\@cla&\multispan\@clb
- \hbox to 3pt{\hfil }%
- \unskip
- \leaders\hrule \@height \arrayrulewidth\hfill
- \cr}%
-\def\@rclineb{%
- \multispan\@clb
- \hbox to 3pt{\hfil }%
- \unskip
- \leaders\hrule \@height \arrayrulewidth\hfill
- \cr}%
-\def\@lcline[#1-#2]{%
- \noalign{%
- \global\@cla #1\relax
- \global\advance\@cla\m@ne
- \ifnum\@cla >0
- \global\let\@tabklu@tmpa\@lclinea
- \else
- \global\let\@tabklu@tmpa\@lclineb
- \fi
- \global\@clb #2\relax
- \global\advance\@clb-\@cla
- }\@tabklu@tmpa
- \noalign{\vskip-\arrayrulewidth}%
-}%
-\def\@lclinea{%
- \multispan\@cla&\multispan\@clb
- \unskip
- \leaders\hrule \@height \arrayrulewidth\hfill
- \hbox to 3pt{\hfil }\cr}%
-\def\@lclineb{%
- \multispan\@clb
- \unskip
- \leaders\hrule \@height \arrayrulewidth\hfill
- \hbox to 3pt{\hfil }\cr}%
-\def\@lrcline[#1-#2]{%
- \noalign{%
- \global\@cla #1\relax
- \global\advance\@cla\m@ne
- \ifnum\@cla>0
- \global \let\@tabklu@tmpa\@lrclinea
- \else
- \global \let\@tabklu@tmpa\@lrclineb
- \fi
- \global \@clb #2\relax
- \global \advance\@clb-\@cla
- }%
- \@tabklu@tmpa
- \noalign{\vskip -\arrayrulewidth}%
- }%
-\def\@lrclinea{%
- \multispan\@cla&\multispan\@clb
- \hbox to 3pt{\hfil }%
- \unskip\leaders\hrule \@height \arrayrulewidth\hfill
- \hbox to 3pt{\hfil }%
- \cr}%
-\def\@lrclineb{%
- \multispan\@clb
- \hbox to 3pt{\hfil }%
- \unskip\leaders\hrule \@height \arrayrulewidth\hfill
- \hbox to 3pt{\hfil }%
- \cr}%
-% \end{macrocode}
-% This is used for |tabular*|
-% \begin{macrocode}
-\newlength\stretchtabsep
-\setlength\stretchtabsep{0pt plus 1fil}
-% \end{macrocode}
-% |\hline| has been redefined to provide some extra vertical
-% space. Unforunately, we could not do the same for |\cline| and
-% friend, because there can be more than one in one row. The old value
-% of |\hline| is saved in |\savehline| in case you need it.
-%
-% |\arraystretch| is left to it's default value, but we did want extra
-% spacing, so |\strut| is redefined (indirectly) to give some.
-%
-% And then, the entire tabular is saved in a |\hbox| so we can measure
-% it up later. (See above for why we need to know this). There is a
-% grouping level added to stop definitions from running away, but
-% maybe this isn't needed. Not sure.
-% \begin{macrocode}
-\let\savehline\hline
-\def\tabular{\begingroup
- \def\hline{\noalign{\vskip3pt}\savehline\noalign{\vskip3pt}}%
- \def\rcline##1{\@rcline[##1]}%
- \def\lcline##1{\@lcline[##1]}%
- \def\lrcline##1{\@lrcline[##1]}%
- \let\rlcline=\lrcline
- \setbox\strutbox\hbox{\vrule height.8\baselineskip
- depth.4\baselineskip width\z@}%
- \setbox0=\hbox\bgroup\def\@halignto{}\@tabular}%
-% \end{macrocode}
-% |\endtabular| is quite straightforward.
-% \begin{macrocode}
-\def\endtabular{\crcr\egroup\egroup $\egroup
- \egroup \tabwidth{\wd0}\unhbox0 \endgroup}%
-% \end{macrocode}
-%
-% Apparently we need to restore the definition of |\hline|
-% inside of array's. This is just a quick hack that 'fixes'
-% the problem.
-% \begin{macrocode}
-\let\klu@intarray\array
-\let\klu@intendarray\endarray
-\def\array{\begingroup \let\hline\savehline \klu@intarray }
-\def\endarray{\klu@intendarray \endgroup}
-% \end{macrocode}
-%
-% |tabular*| follows the same rules, except for redefining
-% |\@tabacol| to insert a |\hfil| value for |\tabskip| in the first
-% preamble-entry (and all following, but these don't count),
-% thereby stretching out all intercolumn space instead
-% of just the last (\LaTeX\ standard behaviour).
-% \begin{macrocode}
-\@namedef{tabular*}#1{%
- \begingroup
- \let\savehline\hline
- \def\hline{\noalign{\vskip3pt}\savehline\noalign{\vskip3pt}}%
- \def\rcline##1{\@rcline[##1]}%
- \def\lcline##1{\@lcline[##1]}%
- \def\lrcline##1{\@lrcline[##1]}%
- \let\rlcline=\lrcline
- \setbox\strutbox\hbox{\vrule height.8\baselineskip
- depth.4\baselineskip width\z@}%
- \setbox0=\hbox\bgroup\def\@halignto{to #1}%
- \def\@tabacol{\edef\@preamble{\@preamble
- \tabskip \stretchtabsep \hskip \tabcolsep}}\@tabular}
-\@namedef{endtabular*}{\endtabular}
-%
-% \end{macrocode}
-% \subsection{TABULAR}
-% This is just ordinary \LaTeX\ tabular, apart from the |\hbox|.
-% \begin{macrocode}
-\def\TABULAR{%
- \let\savehline\hline %compatibility
- \let\rcline\cline \let\lcline\cline
- \let\lrcline\cline \let\rlcline\cline
- \setbox0=\hbox\bgroup\def\@halignto{}\@tabular}%
-\def\endTABULAR{\crcr\egroup\egroup $\egroup
- \egroup \tabwidth{\wd0}\unhbox0 }%
-\@namedef{TABULAR*}#1{%
- \let\savehline\hline %compatibility
- \let\rcline\cline \let\lcline\cline
- \let\lrcline\cline \let\rlcline\cline
- \setbox0=\hbox\bgroup\def\@halignto{to #1}\@tabular}%
-\@namedef{endTABULAR*}{\endtabular}
-\endinput
-% \end{macrocode}
-%\def\IndexParms{\hbadness=10000}
-%\PrintIndex
-%\end{document}
-% end of klutab.sty
projects / helm.git / blobdiff